Motherboard without serial port and modem is serial port
hi all . i have modem with moder 'usrobatic 5668' (http://www.usr.com/support/5668/995668b-ug/main.htm)and it work well in linux with my old motherboard . this week i buy new motherboard Gigabyte EP43-tUD3l and this mother board havent and serial port for i connet my modet to it . so i buy a Wipro pci serial card (2/4/8 port) and the company say: > plug and play atumatic distbute IRQ and I/O adress and seitch no jump > using software to setup 32 bus designm support pci 2.1 criterion adapt > high speed i/o controller (16c550c or UART) one pc can connect several > ...
delphi and pos printer on serial port
Hi, I have been worked with POS prnters connected on LPT port and printing to this printers are very easy, just prepare txt file with text and esc sequences and copy it to lpt port. Now I have small problem with POS printers connected on serial port, this scenario dont work on serial port. Does anybody has experience or idea how to solve this problem, or how to print prepared text and esc sequence to POS printer on serial port? Thanks in advanced... The first thing I would try is adding a printer using the Windows Text driver and print to that. -- Bill Todd (TeamB) S...
Tools, Tools, Tools
</quot> Couple useful things for IT admins out there. I've packaged up Werner and Feder's PoC scanner via py2exe here. You can now simply run: </end_quot> http://www.doxpara.com/ -- 'Never drive faster than your ANGEL can fly' ...
Delphi XE5 components (libnodave , JEDI, Serial port) [Edit]
Hello! In Delphi 2006 i used libnodave library for Siemens PLC connection. Also JEDI was very handy and free Dejan's Crnic Serial port library. Have anyone any experience with this libraries on XE5? Basicaly company bought it just for intraweb but i am looking for a way to use it in HMI(libnodave for reading Siemens PLC variables, Serial for communication with instruments, and JEDI for eas of work) also. Do you think that it could be possble to port thoswe libraries to new version of delphi? Edited by: Marko Ravnik on Feb 25, 2014 6:30 AM Marko Ravnik wrote: > Hello! >...
serial com port monitor, good component for Delphi 2009? [Edit]
I have been looking for a good component that compiles with Delphi 2009 and supports serial com port analyzing ('sniffing'). To give an example, the hhd Serial Port Monitor Control is the functionality we are looking for, but it doesn't work well with Delphi (many errors). It should not interfere or lock the COM port and should work even if the COM port is already in use. (Lot of components we tried needed a lock on the COM port). Wasp (software) is reading barcodes over the COM port and we need to capture the COM data and then display a dialogbox to give the end-user a choic...
how to read data from serial port or usb port
hi,all i know powerbuilder is powerful in database development. i just want to know if i can get data from serial port or usb, and how? thanx I have read data from the serial port by using the Microsoft plugin MSCOMM32.OCX that is included in several of Microsoft's products, but specifically it is included with VISUAL STUDIO. Once you install it in your machine, you can use it from PB by declaring an OLE object container. You then can call its methods and use its properties. Regards 'Xiaotao, Lu' <luxiaotao@hotmail.com> escribi� en el mensaje ...
Code Porting
Hi people, Basically, I am moving an app from Delphi 5 to Delphi 2009 which is all great (yeah right!) and I am having a couple of issues with some thirdparty components that we have the source code for. Being that I wanted to make the task as easy as possible, I was able to download the component in Delphi 2007 format. I have now managed to port that to 2009 so it compiles only with warnings and no errors. So all is good at this moment. Now I am trying to install the component into the IDE by using the install menu option from the project manager. This is where I run into errors. ...
ANN: wxForms for Delphi
We are pleased to announce the release of our wxWidgets Form Designer for Delphi - wxForms for Delphi 1.1. wxForms for Delphi is an integrated form designer plugin for Borland /CodeGear Delphi that helps to create cross platform applications for Windows, Mac OSX and Linux using single source base. The wxForms code from Delphi can be compiled in Mac OSX and Linux without much change using FreePascal. wxForms for Delphi allows you to use all the Delphi's powerful Form Designer/ Editor features (Form Alignment, Object inspector, Component Palette etc ) to quickly create Cross platfor...
Virtual Serial Port Driver emulates COM-ports
Virtual Serial Ports Driver XP creates two pure virtual serial ports in your system which are virtually connected to each other. For other Windows applications, virtual ports will be seen exactly as two real serial ports connected via null-modem cable. With virtual ports created by Virtual Serial Port Driver XP you can connect applications to each other and exchange data between them without occupying your real serial ports and using hardware wiring. Virtual link between virtual serial ports is much faster then real null-modem cable connection and depends on your processor speed. The latest ...
Serial Port
I need a free serial port component for c++ builder xe3 help me please On 09/02/2013 05:29 AM, Registered User wrote: > I need a free serial port component for c++ builder xe3 help me please > http://www.ewoodruff.us/Downloads/CUJArticle.zip > http://www.ewoodruff.us/Downloads/CUJArticle.zip Would you kindly tell me how to install it please? I have C++ XE5, is it still compatible? Thanks Edited by: Mohammad Alsharif on Jun 13, 2014 2:01 PM ...
Serial Port ?
Where is the Serial Port? Nether in Delphi XE serial por was included? =/ João Mello wrote: > Where is the Serial Port? Nether in Delphi XE serial por was > included? =/ Not as a component but the headers of the necessary APIs are available. Create/Read/WriteFile and CloseHandle: http://msdn.microsoft.com/en-us/library/aa363858(v=VS.85).aspx http://msdn.microsoft.com/en-us/library/aa365467(v=VS.85).aspx http://msdn.microsoft.com/en-us/library/aa365747(v=VS.85).aspx http://msdn.microsoft.com/en-us/library/ms724211(v=VS.85).aspx More info about the Communica...
Serial port....
This is a multi-part message in MIME format. ------=_NextPart_000_003E_01C1F6C8.DE8477C0 Content-Type: text/plain; charset='iso-8859-1' Content-Transfer-Encoding: quoted-printable Hi everybody, how i can reading data from a serial port. Thanks Erasmo Flores. ------=_NextPart_000_003E_01C1F6C8.DE8477C0 Content-Type: text/html; charset='iso-8859-1' Content-Transfer-Encoding: quoted-printable <!DOCTYPE HTML PUBLIC '-//W3C//DTD HTML 4.0 Transitional//EN'> <HTML><HEAD> <META content=3D'text/html; charset=3Diso-885...
hi all . i have modem with moder 'usrobatic 5668' (http://www.usr.com/support/5668/995668b-ug/main.htm)and it work well in linux with my old motherboard . this week i buy new motherboard Gigabyte EP43-tUD3l and this mother board havent and serial port for i connet my modet to it . so i buy a Wipro pci serial card (2/4/8 port) and the company say: > plug and play atumatic distbute IRQ and I/O adress and seitch no jump > using software to setup 32 bus designm support pci 2.1 criterion adapt > high speed i/o controller (16c550c or UART) one pc can connect several > ...
delphi and pos printer on serial port
Hi, I have been worked with POS prnters connected on LPT port and printing to this printers are very easy, just prepare txt file with text and esc sequences and copy it to lpt port. Now I have small problem with POS printers connected on serial port, this scenario dont work on serial port. Does anybody has experience or idea how to solve this problem, or how to print prepared text and esc sequence to POS printer on serial port? Thanks in advanced... The first thing I would try is adding a printer using the Windows Text driver and print to that. -- Bill Todd (TeamB) S...
Tools, Tools, Tools
</quot> Couple useful things for IT admins out there. I've packaged up Werner and Feder's PoC scanner via py2exe here. You can now simply run: </end_quot> http://www.doxpara.com/ -- 'Never drive faster than your ANGEL can fly' ...
Delphi XE5 components (libnodave , JEDI, Serial port) [Edit]
Hello! In Delphi 2006 i used libnodave library for Siemens PLC connection. Also JEDI was very handy and free Dejan's Crnic Serial port library. Have anyone any experience with this libraries on XE5? Basicaly company bought it just for intraweb but i am looking for a way to use it in HMI(libnodave for reading Siemens PLC variables, Serial for communication with instruments, and JEDI for eas of work) also. Do you think that it could be possble to port thoswe libraries to new version of delphi? Edited by: Marko Ravnik on Feb 25, 2014 6:30 AM Marko Ravnik wrote: > Hello! >...
serial com port monitor, good component for Delphi 2009? [Edit]
I have been looking for a good component that compiles with Delphi 2009 and supports serial com port analyzing ('sniffing'). To give an example, the hhd Serial Port Monitor Control is the functionality we are looking for, but it doesn't work well with Delphi (many errors). It should not interfere or lock the COM port and should work even if the COM port is already in use. (Lot of components we tried needed a lock on the COM port). Wasp (software) is reading barcodes over the COM port and we need to capture the COM data and then display a dialogbox to give the end-user a choic...
how to read data from serial port or usb port
hi,all i know powerbuilder is powerful in database development. i just want to know if i can get data from serial port or usb, and how? thanx I have read data from the serial port by using the Microsoft plugin MSCOMM32.OCX that is included in several of Microsoft's products, but specifically it is included with VISUAL STUDIO. Once you install it in your machine, you can use it from PB by declaring an OLE object container. You then can call its methods and use its properties. Regards 'Xiaotao, Lu' <luxiaotao@hotmail.com> escribi� en el mensaje ...
Code Porting
Hi people, Basically, I am moving an app from Delphi 5 to Delphi 2009 which is all great (yeah right!) and I am having a couple of issues with some thirdparty components that we have the source code for. Being that I wanted to make the task as easy as possible, I was able to download the component in Delphi 2007 format. I have now managed to port that to 2009 so it compiles only with warnings and no errors. So all is good at this moment. Now I am trying to install the component into the IDE by using the install menu option from the project manager. This is where I run into errors. ...
ANN: wxForms for Delphi
We are pleased to announce the release of our wxWidgets Form Designer for Delphi - wxForms for Delphi 1.1. wxForms for Delphi is an integrated form designer plugin for Borland /CodeGear Delphi that helps to create cross platform applications for Windows, Mac OSX and Linux using single source base. The wxForms code from Delphi can be compiled in Mac OSX and Linux without much change using FreePascal. wxForms for Delphi allows you to use all the Delphi's powerful Form Designer/ Editor features (Form Alignment, Object inspector, Component Palette etc ) to quickly create Cross platfor...
Virtual Serial Port Driver emulates COM-ports
Virtual Serial Ports Driver XP creates two pure virtual serial ports in your system which are virtually connected to each other. For other Windows applications, virtual ports will be seen exactly as two real serial ports connected via null-modem cable. With virtual ports created by Virtual Serial Port Driver XP you can connect applications to each other and exchange data between them without occupying your real serial ports and using hardware wiring. Virtual link between virtual serial ports is much faster then real null-modem cable connection and depends on your processor speed. The latest ...
Serial Port
I need a free serial port component for c++ builder xe3 help me please On 09/02/2013 05:29 AM, Registered User wrote: > I need a free serial port component for c++ builder xe3 help me please > http://www.ewoodruff.us/Downloads/CUJArticle.zip > http://www.ewoodruff.us/Downloads/CUJArticle.zip Would you kindly tell me how to install it please? I have C++ XE5, is it still compatible? Thanks Edited by: Mohammad Alsharif on Jun 13, 2014 2:01 PM ...
Serial Port ?
Where is the Serial Port? Nether in Delphi XE serial por was included? =/ João Mello wrote: > Where is the Serial Port? Nether in Delphi XE serial por was > included? =/ Not as a component but the headers of the necessary APIs are available. Create/Read/WriteFile and CloseHandle: http://msdn.microsoft.com/en-us/library/aa363858(v=VS.85).aspx http://msdn.microsoft.com/en-us/library/aa365467(v=VS.85).aspx http://msdn.microsoft.com/en-us/library/aa365747(v=VS.85).aspx http://msdn.microsoft.com/en-us/library/ms724211(v=VS.85).aspx More info about the Communica...
Serial port....
This is a multi-part message in MIME format. ------=_NextPart_000_003E_01C1F6C8.DE8477C0 Content-Type: text/plain; charset='iso-8859-1' Content-Transfer-Encoding: quoted-printable Hi everybody, how i can reading data from a serial port. Thanks Erasmo Flores. ------=_NextPart_000_003E_01C1F6C8.DE8477C0 Content-Type: text/html; charset='iso-8859-1' Content-Transfer-Encoding: quoted-printable <!DOCTYPE HTML PUBLIC '-//W3C//DTD HTML 4.0 Transitional//EN'> <HTML><HEAD> <META content=3D'text/html; charset=3Diso-885...
Com PortComponent
ตัวอย่างพื้นฐานการเขียนโปรแกรม Delphi เพื่อเชื่อมต่อกับพอร์ตสื่อสาร. Hello: I want to use Arduino with Delphi controlling the serial port. Use Delphi Tokyo 10.2. What you have to do is the interface of Delphi is to turn on and off a Led, then you get messages from Arduino indicating when the Led is on or off.
- I've found this piece of code for Delphi and Lazarus (free pascal), It suppose to control the level of brightness of a LED through the pin 7 of Arduino Board. Example comes with Arduino Sketch and Delphi/Lazarus Project. It uses freeware Synaser library to communicate directly to the serial port.
- The Windows Standard Serial Communications Library for Delphi (WSC4D) is an serial communication library based on the Windows Includes 52 functions plus modem control, serial comm API. To a serial port from within a Delphi application. A simple interface allows accessing data from a serial port using RS232 or multi-drop RS422 / RS485 serial ports.
- Dealing with serial ports is not as simple as dropping a TADOCONNECTION and a TADOQUERY component on a DataModule and setting the aprameters and then off you go. There are several factors to consider when working with serial ports, things like: Is there a carrier signal (i.e. Is the port connected to anything)?
Delphi 7 Serial Port Cable
The Async Professional port component builds the foundation forall communications applications. The simplest application might contain asingle TApdComPort; a more complex application might contain one or more portcomponents and many other components that rely on the services of a TApdComPort(terminal windows, modems, and so on).
The TApdComPort component, which contains properties andmethods for the following:
Delphi 7 Com Port
Configuring the serial port hardware and Windowscommunications driver (buffer sizes, line parameters, flow control).
Providing information about the state of the serial port(modem signals, line errors).
Transmitting and receiving data.
Interfacing with the TApdDataPacket component to identifyand handle received data.
Assigning VCL events to handle received data, matchedstrings, status changes, and timers.
In addition to its support for standard serial ports, theTApdComPort includes specialized support for the RS-485 communication standard.
Delphi 7 Com Port Component
If you need to support network or Internet communications usingWinsock, you should consider using theTApdWinsockPort instead of the TApdComPort. Since the TApdWinsockPort is adescendant of the TApdComPort, it retains all capabilities of the TApdComPort,and adds support for Winsock.