In this tutorial, I’ll show you how to connect the Arduino to the Bescor MP-101.
Note: Please check for continuity with a multi-meter. The colors of the wires may be different.
update: 12-26-2013
Pinout of the DIN connector.
Hard reset your router (Very important) and make sure you have the latest firmware version (Get this firmware from Netgear official site!) Even if you have the latest version re-download it tot he router. I believe the latest version now has auto-update which you want. Disable Ping replies. NetGear MP101 Netgear's MP101 is among the first digital media receivers to play user-selected tracks and albums from Rhapsody's fee-based, online streaming music service. Netgear Mp101 Hack. Download Software Receiver Tanaka. Join the world's #1 train simulator franchise! Build it, drive it or operate your very own 3D railroad.
Pin 1 – Purple
Pin 2 – Green – Right
Pin 3 – Black – Up
Pin 4 – White – Vin
Pin 5 – Blue – Down
Pin 6 – Yellow – Left
Pin 7 – Red – Ground
Step 1: Prepare the Wires
There are several ways to connect the wires to the Arduino. I cut the controller and cut off the ends of the wires and solder jumpers to it. Note: It’s better to cover the exposed soldered connections to prevent the wires from touching.
Step 2: Connect the WiiChuck Adapter, Power and Ground Wires
The WiiChuck adapter makes it easy to connect the Nunchuck to the Arduino. Here’s the one I’m using.
Connect the white wire to vin and red wire to ground.
Netgear Mp101 Download
White – Vin
Red -Ground
Step 3: Connect the Blue, Black, Green, and Yellow Wires
Note: The purple wire is not used.
Blue – Pin 9
Black -Pin 10
Green – Pin 3
Yellow – Pin 11